8-16 Agilent 4155B/4156B User’s Guide Vol.2, Edition 5
If You Have A Problem
If Errors Occur
10046 VSU1 and VMU2 failed ±2 V measurement self-test in 2 V range.
10047 VSU2 and VMU1 failed ±2 V measurement self-test in 2 V range.
10048 VMUs and VSUs failed differential 2 V range self-test. This test
measures ±2 V by VMUs in differential mode. (VSU1 is connected to
VMU1, and VSU2 is connected to VMU2. VSU1 forces 0 V. VSU2
forces 2 V).
10049 VMUs and VSUs failed differential 2 V range self-test. This test
measures 0 V by VMUs in differential mode. (VSU1 is connected to
VMU1, and VSU2 is connected to VMU2. VSU1 forces 0 V.)
10050 VMUs and VSUs failed differential 0.2 V range self-test. This test
measures 0 V by VMUs in differential mode. (VSU1 is connected to
VMU1, and VSU2 is connected to VMU2. VSU1 forces 0 V.)
10051 VMUs and VSUs failed differential 2 V range self-test. This test
measures 0 V by VMUs in differential mode. (VSU2 is connected to
VMU1 and 2, and forces 0 V.)
10052 VMUs and VSUs failed differential 0.2 V range self-test. This test
measures 0 V by VMUs in differential mode. (VSU2 is connected to
VMU1 and 2, and forces 0 V.)
10x20 SMU failed function check.
10x21 SMU failed CMR (Common Mode Rejection) amp calibration.
10x22 SMU failed oscillation detector test.
10x23 SMU failed V set and V measure calibration.
10x24 SMU failed I set and I measure calibration.
10x25 SMU failed I bias test.
10x26 SMU failed V switch test.
10760 PGU1 failed pulse gain calibration.
10761 PGU2 failed pulse gain calibration.
10762 PGU1 failed pulse offset calibration.
10763 PGU2 failed pulse offset calibration.
10764 PGU1 failed voltage calibration of base value.
10765 PGU2 failed voltage calibration of base value.
10766 PGU1 failed leading time calibration.
To Next Page
Loading...
Need help?
General
