Agilent 4155B/4156B User’s Guide Vol.2, Edition 5 8-17
If You Have A Problem
If Errors Occur
10767 PGU2 failed leading time calibration.
10768 PGU1 failed trailing time calibration.
10769 PGU2 failed trailing time calibration.
10770 PGU1 failed slope offset calibration.
10771 PGU2 failed slope offset calibration.
10772 PGU1 failed slope sampling calibration.
10773 PGU2 failed slope sampling calibration.
10875 GNDU failed offset calibration.
10905 AD converter failed ROM or RAM self-test.
10906 Successive approximation AD converter failed calibration or self-test.
10907 Integrating type AD converter failed calibration or self-test.
10908 AD converter reached timeout. AD converter did not return completion
status within certain time after sending calibration or self-test
command.
To Next Page
Loading...
Need help?
General
