8-26 Agilent 4155B/4156B User’s Guide Vol.2, Edition 5
If You Have A Problem
If Errors Occur
143 COMMON channel FCTN must be CONST.
144 COMMON channel FCTN must be NSYNC.
145 System busy. Unable to change page when MEAS.
146 System busy. Unable to change page when STRS.
147 Ineffective page in this setup.
148 X axis is not assigned.
149 Y1 axis is not assigned.
150 ENABLE DELAY must be <= 32767 ´ INIT INT
For sampling measurements, when stop condition is set to ENABLE,
enable delay must be initial interval ´ 32767 or less.
151 No unit is set to STANDBY ON.
152 System busy. MEASURING (or 4145 USER MODE).
153 MIN, MAX have different sign in LOG.
154 Can do such operation only for USER VAR.
155 Illegal setup. The name was already used.
156 User variable is used in user function.
If a user variable is used in user functions, the user variable cannot be
deleted.
157 AUTO Analysis is undefined.
158 TOT SAMP TIME must be<=INIT INT ´ 32767.
Total sampling time must be initial interval ´ 32767 or less and
1 ´ 10
11
or less.
159 Measure channel is not assigned.
160 Unable to find approximate data.
161 Illegal graph scale setup.
163 The Sweep/Pulse Polarity is not same.
164 SYNC can not be set for standby CH.
To Next Page
Loading...
Need help?
General
