Agilent Technologies 89410A User Manual

To activate the analyzer’s network interface
1. Press [
Local/Setup
], [
LAN setup
], then press [
LAN power-on
] to display “active.”
2. Turn off the analyzer, then turn it back on to make the new setting permanent.
When you are not using the network interface, you should press
[
LAN power-on
] to display “inactive.” This will free additional memory for
other uses.
Using the LAN (Options UTH & UG7)
14 - 5

Agilent Technologies 89410A Specifications

General

Brand	Agilent Technologies
Model	89410A
Category	Measuring Instruments
Language	English