Agilent Technologies 89410A User Manual

l Scramble-code group or manual scramble-code detection. You can enter the
scramble code manually or configure the analyzer to determine the scramble
code within a scramble-code group.
l Mirrored (flipped) frequency spectrums so you can remove the effects of hi-side
mixing.
l Time gating, which lets you select one or more slots for analysis.
What option B79 does
Option B79 extends option B73 (Digital Wideband CDMA Analysis) to also measure
W-CDMA signals that conform to ARIB (Association of Radio Industries and
Businesses) revision 1.0-1.2. Option B79 adds additional code layers, code
channels, code groups, and scramble codes required for ARIB 1.0-1.2 signals.
Note Option B79 requires option B73.
What option 080 does
Option 080 (Digital 3GPP W-CDMA Analysis) lets you measure 3GPP, version 3.1
(1999) forward link (base-station) W-CDMA signals. Like option B73 and B79, this
option despreads and decodes W-CDMA signals and automatically identifies all the
active channels regardless of the code rate or the short code. Option 080 provides
the same features as option B73, with the following exceptions:
Note Option 080 requires options AYA (Digital Demodulation Analysis), AY9 (Extended
Time Capture), and UTH (20 Mb Extended RAM and Additional I/O) .
l 3.84 MHz variable chip rate (the chip rate is variable from slightly below 3.84
MHz to slightly above 3.84 MHz).
A standard setup that automatically configures the analyzer for 5 MHz W-CDMA
measurements.
Wideband CDMA Concepts (Options B73, B79, and 080)
24 - 3

Agilent Technologies 89410A Specifications

General

Brand	Agilent Technologies
Model	89410A
Category	Measuring Instruments
Language	English