VPRN Service Configuration Commands
Page 1068 7750 SR OS Services Guide
disable-communities
Syntax disable-communities [standard] [extended]
no disable-communities
Context config>service>vprn>bgp
config>service>vprn>bgp>group
config>service>vprn>bgp>group>neighbor
Description This command configures BGP to disable sending communities.
Parameters standard — Specifies standard communities that existed before VPRNs or 2547.
extended — Specifies BGP communities used were expanded after the concept of 2547 was
introduced, to include handling the VRF target.
disable-fast-external-failover
Syntax [no] disable-fast-external-failover
Context config>service>vprn>bgp
config>service>vprn>bgp>group
config>service>vprn>bgp>group>neighbor
Description This command configures BGP fast external failover.
enable-peer-tracking
Syntax [no] enable-peer-tracking
Context config>service>vprn>bgp
config>service>vprn>bgp>group
config>service>vprn>bgp>group>neighbor
Description This command enables BGP peer tracking.
Default no enable-peer-tracking
export
Syntax export policy [policy...]
no export
Context config>service>vprn>bgp
config>service>vprn>bgp>group
config>service>vprn>bgp>group>neighbor
config>service>vprn>rip
config>service>vprn>rip>group
config>service>vprn>rip>group>neighbor
Description This command specifies the export policies to be used to control routes advertised to BGP neighbors.
To Next Page
Loading...
