VPRN Service Configuration Commands
Page 1084 7750 SR OS Services Guide
Parameters authentication-key — The authentication key. The key can be any combination of ASCII characters
up to 8 characters in length (unencrypted). If spaces are used in the string, enclose the entire
string in quotation marks (“ ”).
hash-key — The hash key. The key can be any combination of ASCII characters up to 22 characters in
length (encrypted). If spaces are used in the string, enclose the entire string in quotation marks (“
”).
This is useful when a user must configure the parameter, but, for security purposes, the actual
unencrypted key value is not provided.
hash — Specifies the key is entered in an encrypted form. If the hash parameter is not used, the key
is assumed to be in a non-encrypted, clear text form. For security, all keys are stored in encrypted
form in the configuration file with the hash parameter specified.
hash2 — Specifies the key is entered in a more complex encrypted form. If the hash2 parameter is
not used, the less encrypted hash form is assumed.
authentication-type
Syntax authentication-type {password | message-digest}
no authentication-type
Context config>service>vprn>ospf>area>interface
config>service>vprn>ospf>area>virtual-link
Description This command enables authentication and specifies the type of authentication to be used on the OSPF
interface.
Both simple password and message-digest authentication are supported.
By default, authentication is not enabled on an interface.
The no form of the command disables authentication on the interface.
Default no authentication — No authentication is enabled on an interface.
Parameters password — This keyword enables simple password (plain text) authentication. If authentication is
enabled and no authentication type is specified in the command, simple password authentication
is enabled.
message-digest — This keyword enables message digest MD5 authentication in accordance with
RFC1321. If this option is configured, then at least one message-digest-key must be configured
dead-interval
Syntax dead-interval seconds
no dead-interval
Context config>service>vprn>ospf>area>interface
config>service>vprn>ospf>area>virtual-link
To Next Page
Loading...
