Virtual Private Routed Network Services
7750 SR OS Services Guide Page 1113
Values qtag1: 0 — 4094
qtag2 : * | 0 — 4094
The values depends on the encapsulation type configured for the interface. The following table
describes the allowed values for the port and encapsulation types.
interface — Specifies matching SAPs with the specified IP interface.
ip-addr — The IP address of the interface for which to display matching SAPs.
Values 1.0.0.0 — 223.255.255.255
ip-int-name — The IP interface name for which to display matching SAPs.
authentication-policy policy name — Specifies an existing authentication policy.
Output Show Service SAP — The following table describes show service SAP output fields:
Port Type Encap-Type Allowed Values Comments
Ethernet Null 0 The SAP is identified by the port.
Ethernet Dot1q 0 — 4094 The SAP is identified by the 802.1Q tag on the port.
Note that a 0 qtag1 value also accepts untagged packets
on the dot1q port.
Ethernet QinQ qtag1: 0 — 4094
qtag2: 0 — 4094
The SAP is identified by two 802.1Q tags on the port.
Note that a 0 qtag1 value also accepts untagged packets
on the dot1q port.
SONET/SDH IPCP - The SAP is identified by the channel. No BCP is
deployed and all traffic is IP.
SONET/SDH
TDM
BCP-Null 0 The SAP is identified with a single service on the chan-
nel. Tags are assumed to be part of the customer packet
and not a service delimiter.
SONET/SDH
TDM
BCP-Dot1q 0 — 4094 The SAP is identified by the 802.1Q tag on the channel.
SONET/SDH
TDM
Frame Relay 16 — 991 The SAP is identified by the data link connection iden-
tifier (DLCI).
SONET/SDH
ATM
ATM vpi (NNI) 0 — 4095
vpi (UNI) 0 — 255
vci 1, 2, 5 — 65535
The SAP is identified by the PVC identifier (vpi/vci).
Label Description
Port ID The ID of the access port where the SAP is defined.
Svc ID The service identifier.
SapMTU The SAP MTU value.
I.QoS The SAP ingress QoS policy number specified on the ingress SAP.
To Next Page
Loading...
