EasyManua.ls Logo

Alcatel-Lucent 7750 SR OS - Page 1167

Alcatel-Lucent 7750 SR OS
1506 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Virtual Private Routed Network Services
7750 SR OS Services Guide Page 1167
Group Type : No Type State : Up
Peer AS : 40000 Local AS : 65206
Local Address : n/a Loop Detect : Ignore
Export Policy : direct2bgp
Hold Time : 90 Keep Alive : 30
Cluster Id : None Client Reflect : Enabled
NLRI : Unicast Preference : 170
List of Peers
- 10.0.0.1 : To_Jukebox
- 10.0.0.12 : Not Available
- 10.0.0.13 : Not Available
- 10.0.0.14 : To_ALA-1
- 10.0.0.15 : To_H-215
Total Peers : 5 Established : 2
===============================================================================
*A:ALA-12#
neighbor
Syntax neighbor [ip-address [[family family] filter1]]
neighbor [as-number [[family family] filter2]]
Context show>router>bgp
Description This command displays BGP neighbor information. This command can be entered with or without
any parameters.
When this command is issued without any parameters, information about all BGP peers displays.
When the command is issued with a specific IP address or ASN, information regarding only that
specific peer or peers with the same AS display.
When either received-routes or advertised-routes is specified, then the routes received from or sent
to the specified peer is listed (see second output example).
Note: This information is not available by SNMP.
When either history or suppressed is specified, then the routes learned from those peers that either
have a history or are suppressed (respectively) are listed.
The ‘State’ field displays the BGP peers protocol state. In additional to the standard protocol states,
this field can also display the ‘Disabled’ operational state which indicates the peer is operationally
disabled and must be restarted by the operator.
Parameters ip-addr — Displays the BGP neighbor with the specified IP address.
family familySpecifies the type of routing information to be distributed by the BGP instance.
Values ipv4, vpn-ipv4
filter1 — Specifies route criteria.
Values received-routes, advertised-routes, history, suppressed, detail
filter2 — Specifies route criteria.
Values history, suppressed, detail

Table of Contents

Other manuals for Alcatel-Lucent 7750 SR OS

Related product manuals