Alcatel-Lucent 7750 SR OS - Page 1168

VPRN Service Configuration Commands
Page 1168 7750 SR OS Services Guide
Output Standard and Detailed Neighbor — The following table describes the standard and detailed
command output fields for a BGP neighbor:
Label Description
Peer
The IP address of the configured BGP peer.
Group
The BGP peer group to which this peer is assigned.
Peer AS
The configured or inherited peer AS for the peer group.
Peer Address
The configured address for the BGP peer.
Peer Port
The TCP port number used on the far-end system.
Local AS
The configured or inherited local AS for the peer group.
Local Address
The configured or inherited local address for originating peering for
the peer group.
Local Port
The TCP port number used on the local system.
Peer Type
External — Peer type configured as external BGP peers.
Internal — Peer type configured as internal BGP peers.
State
Idle — The BGP peer is not accepting connections.
Active — BGP is listening for and accepting TCP connections
from this peer.
Connect — BGP is attempting to establish a TCP connection from
this peer.
Open Sent — BGP has sent an OPEN message to the peer and is
waiting for an OPEN message from the peer.
Open Confirm — BGP has received a valid OPEN message
from the peer and is awaiting a KEEPALIVE or NOTIFICATION.
Established — BGP has successfully established a peering and
is exchanging routing information.
Last State
Idle — The BGP peer is not accepting connections.
Active — BGP is listening for and accepting TCP connections
from this peer.
Connect — BGP is attempting to establish a TCP connection with
this peer.
Connect — BGP is attempting to establish a TCP connections
from this peer.
Open Sent — BGP has sent an OPEN message to the peer and is
waiting for an OPEN message from the peer.
Open Confirm — BGP has received a valid OPEN message
from the peer and is awaiting a KEEPALIVE or NOTIFICATION.