Alcatel-Lucent 7750 SR OS - Page 1191

Virtual Private Routed Network Services
7750 SR OS Services Guide Page 1191
Sample Output
*A:ALA-12# show router 3 rip peers
==============================================================================
RIP Peers
==============================================================================
Peer IP Addr Interface Name Version Last Update
------------------------------------------------------------------------------
10.0.5.13 router-2/2 RIPv2 0
10.0.6.16 router-2/3 RIPv2 2
10.0.9.14 router-2/5 RIPv2 8
10.0.10.15 router-2/4 RIPv2 0
------------------------------------------------------------------------------
No. of Peers: 4
==============================================================================
*A:ALA-12#
*A:ALA-12# show router 3 rip neighbor detail
==============================================================================
RIP Neighbors (Detail)
==============================================================================
Neighbor "router-2/7"
------------------------------------------------------------------------------
Description : No Description Available
Primary IP : 10.0.16.12 Group : seven
Admin State : Up Oper State : Up
Send Mode : None Receive Mode : Both
Metric In : 1 Metric Out : 1
Split Horizon : Enabled Check Zero : Disabled
Message Size : 25 Preference : 100
Auth. Type : None Update Timer : 3
Timeout Timer : 6 Flush Timer : 6
Export Policies:
Rip2Rip
direct2Rip
bgp2Rip
Import Policies:
None
==============================================================================
*A:ALA-12#
Message Size
The maximum number of routes per RIP update message.
Preference
The preference of RIP routes from the neighbor.
Auth. Type
Specifies the authentication type.
Update Timer
The current setting of the RIP update timer value expressed in seconds.
Timeout Timer
The current RIP timeout timer value expressed in seconds.
Export Policies
The export route policy that is used to determine routes advertised to all
peers.
Import Policies
The import route policy that is used to determine which routes are
accepted from RIP neighbors.
Label Description