VPRN Service Configuration Commands
Page 1200 7750 SR OS Services Guide
*A:ALA-12# show router 3 static-arp 12.200.1.1
==============================================================================
ARP Table
==============================================================================
IP Address MAC Address Age Type Interface
------------------------------------------------------------------------------
12.200.1.1 00:00:5a:01:00:33 00:00:00 Inv to-ser1 a
===============================================================================
*A:ALA-12#
*A:ALA-12# show router 3 static-arp to-ser1
==============================================================================
ARP Table
==============================================================================
IP Address MAC Address Age Type Interface
------------------------------------------------------------------------------
10.200.0.253 00:00:5a:40:00:01 00:00:00 Sta to-ser1
===============================================================================
S*A:ALA-12#
*A:ALA-12# show router 3 static-arp mac 00:00:5a:40:00:01
==============================================================================
ARP Table
==============================================================================
IP Address MAC Address Age Type Interface
-------------------------------------------------------------------------------
10.200.0.253 00:00:5a:40:00:01 00:00:00 Sta to-ser1
==============================================================================
*A:ALA-12#
static-route
Syntax static-route [[ip-prefix [/mask]] | [preference preference] | [next-hop ip-addr]]
Context show>router
Description This command displays the static entries in the routing table.
If no options are present. all static routes are displayed sorted by prefix.
Parameters ip-prefix[/mask] — Displays static routes only matching the specified ip-prefix and optional mask.
preference preference — Only displays static routes with the specified route preference.
Values 0 — 65535
next-hop ip-addr — Only displays static routes with the specified next hop IP address.
Output Show Static Route Output — The following table describes the output fields for the static route
table:
Label Description
IP Addr/mask
The static route destination address and mask.
Pref
The route preference value for the static route.
Metric
The route metric value for the static route.