Mirror Services
7750 SR OS Services Guide Page 1315
hold-down-time
Configures the minimum time period the SDP will remain in the
operationally down state in response to SDP keepalive monitoring.
98
max-drop-count
Configures the number of consecutive SDP keepalive failed request attempts
or remote replies that can be missed after which the SDP is operationally
downed.
98
message-length
Configures the size of SDP monitoring keepalive request messages. 99
timeout
Configures the time interval that the SDP waits before tearing down the
session.
99
no shutdown
Administratively enables the keepalive messages. 79
Table 1: CLI Commands to Configure Mirroring Parameters (Continued)
Command Description Page
To Next Page
Loading...
