Mirror Services
7750 SR OS Services Guide Page 1323
Each remote mirrored service (Figure 69) (across the network core) requires the following
configurations:
1. Define the remote destination (SDP)
2. Identify the remote source (the device allowed to mirror traffic to this device)
3. Specify the mirror destination (SAP)
4. Specify mirror source (port, SAP, SDP, IP filter, MAC filter, ingress label)
Figure 3: Remote Mirrored Service Tasks
OSSG029A
Sniffer
SDP #
ALA-A ALA-B
Define Remote
Destination
Identify Remote
Source
Specify Mirror
Source
Port 1/2/1
Specify Mirror
Destination
SAP 1/1/3
To Next Page
Loading...
