OAM and SAA Command Reference
7750 SR OS Services Guide Page 1407
Responding SDP-ID
Path Used
Whether the responding 7750 SR used the responding SDP-ID
to respond to the svc-ping request. If the request was received
via the originating SDP-ID and a valid return SDP-ID is found,
operational and has a valid egress service label, the far-end 7750
SR should use the SDP-ID as the return SDP-ID. If the far end
uses the responding SDP-ID as the return path, Yes is displayed.
If the far end does not use the responding SDP-ID as the return
path, No is displayed. If the responding SDP-ID is non-existent,
N/A is displayed.
Yes
No
N/A
Responding SDP-ID
Administrative State
The administrative state of the far-end SDP-ID associated with
the return path for service-id. When a return path is administra-
tively down, Admin-Down is displayed. If the return SDP-ID is
administratively up, Admin-Up is displayed. If the responding
SDP-ID is non-existent, N/A is displayed.
Admin-Up
Admin-Up
N/A
Responding SDP-ID
Operational State
The operational state of the far-end SDP-ID associated with the
return path for service-id. When a return path is operationally
down, Oper-Down is displayed. If the return SDP-ID is opera-
tionally up, Oper-Up is displayed. If the responding SDP-ID is
non-existent, N/A is displayed.
Oper-Up
Oper-Down
N/A
Responding SDP-ID
Binding Admin State
The local administrative state of the responder’s SDP-ID bind-
ing to service-id. If an SDP-ID is not bound to the service, N/A
is displayed.
Admin-Up
Admin-Down
N/A
Responding SDP-ID
Binding Oper State
The local operational state of the responder’s SDP-ID binding to
service-id. If an SDP-ID is not bound to the service, N/A is dis-
played.
Oper-Up
Oper-Down
N/A
Originating VC-ID The Originators VC-ID associated with the SDP-ID to the far-
end address that is bound to service-id. If the SDP-ID signaling
is off, originator-vc-id is 0. If the originator-vc-id does not exist,
N/A is displayed.
originator-vc-id
N/A
Responding VC-ID The Responder’s VC-ID associated with the SDP-ID to
originator-id that is bound to service-id. If the SDP-ID signaling
is off or the service binding to SDP-ID does not exist, responder-
vc-id is 0. If a response is not received, N/A is displayed.
responder-vc-id
N/A
Originating Egress Ser-
vice Label
The originating service label (VC-Label) associated with the
service-id for the originating SDP-ID. If service-id does not
exist locally, N/A is displayed. If service-id exists, but the egress
service label has not been assigned, Non-Existent is displayed.
egress-vc-label
N/A
Non-Existent
Field Description Values (Continued)
To Next Page
Loading...
