OAM and SAA Command Reference
Page 1432 7750 SR OS Services Guide
address} | {interface interface-name} | bypass-routing] [count requests] [do-not-frag-
ment] [router router-instance] [timeout timeout]
Context config>saa>test>type
Description This command configures an ICMP traceroute test.
Parameters ip-address — The far-end IP address to which to send the svc-ping request message in dotted decimal
notation.
Values ipv4-address: a.b.c.d
ipv6-address: x:x:x:x:x:x:x:x
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
dns-name — The DNS name of the far-end device to which to send the svc-ping request message,
expressed as a character string up to 63 characters maximum.
Values ipv6-address: x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x: [0 — FFFF]H
d: [0 — 255]D
interface (32 chars max, mandatory for link local
addresses)
rapid — Packets will be generated as fast as possible instead of the default 1 per second.
detail — Displays detailed information.
ttl time-to-live — The TTL value for the MPLS label, expressed as a decimal integer.
Values 1 — 128
tos type-of-service — Specifies the service type.
Values 0 — 255
size bytes — The request packet size in bytes, expressed as a decimal integer.
Values 0 — 16384
pattern pattern — The date portion in a ping packet will be filled with the pattern value specified. If
not specified, position info will be filled instead.
Values 0 — 65535
source ip-address|dns-name — Specifies the IP address to be used.
Values ipv4-address: a.b.c.d
ipv6-address: x:x:x:x:x:x:x:x
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]Ddns-name:128 characters max
interval seconds — This parameter is used to override the default request message send interval and
defines the minimum amount of time that must expire before the next message request is sent.
To Next Page
Loading...
