Alcatel-Lucent 7750 SR OS - Page 1486

Tools Configuration Commands
Page 1488 7750 SR OS Services Guide
Parameters tod-suite-name — Specify an existing TOD name.
aps
Syntax aps
Context tools>perform
Description This command enables the context to perform Automated Protection Switching (APS) operations.
clear
Syntax clear aps-id {protect | working}
Context tools>perform>aps
Description This command removes all Automated Protection Switching (APS) operational commands.
Parameters aps-id — This option clears a specific APS on un-bundled SONET/SDH ports.
protect — This command clears a physical port that is acting as the protection circuit for the APS
group.
working — This command clears a physical port that is acting as the working circuit for this APS
group.
exercise
Syntax exercise aps-id {protect | working}
Context tools>perform>aps
Description This command performs an exercise request on the protection or working circuit.
Parameters aps-id — This option clears a specific APS on un-bundled SONET/SDH ports.
protect — This command performs an exercise request on the port that is acting as the protection
circuit for the APS group.
working — This command performs an exercise request on the port that is acting as the working
circuit for this APS group.
force
Syntax force aps-id {protect | working}
Context tools>perform>aps
Description This command forces a switch to either the protect or working circuit
Parameters aps-id — This option clears a specific APS on un-bundled SONET/SDH ports.