Tools
7750 SR OS Services Guide Page 1489
protect — This command clears a physical port that is acting as the protection circuit for the APS
group.
working — This command clears a physical port that is acting as the working circuit for this APS
group.
lockout
Syntax lockout aps-id
Context tools>perform>aps
Description This command locks out the protection circuit.
Parameters aps-id — Automated Protection Switching ID
Values 1 — 64
request
Syntax request aps-id {protect | working}
Context tools>perform>aps
Description This command requests a manual switch to protection or working circuit.
Parameters aps-id — This option clears a specific APS on un-bundled SONET/SDH ports.
protect — This command requests a manual switch to a port that is acting as the protection circuit for
the APS group.
working — This command requests a manual switch to a port that is acting as the working circuit for
this APS group.
consistency
Syntax consistency
Context tools>perform>router
Description This command performs route table manager (RTM) consistency checks.
Default none
isis
Syntax isis
Context tools>perform>router
Description This command enables the context to configure tools to perform certain ISIS tasks.
To Next Page
Loading...
