Alcatel-Lucent 7750 SR OS - Page 1489

Tools
7750 SR OS Services Guide Page 1491
Parameters lsp lsp-name — Specifies the name that identifies the LSP. The LSP name can be up to 32 characters
long and must be unique.
path path-name — Specifies the name for the LSP path up, to 32 characters in length.
trap-suppress
Syntax trap-suppress [number-of-traps] [time-interval]
Context tools>perform>router>mpls
Description This command modifies thresholds for trap suppression.
Default none
Parameters number-of-traps — Specify the number of traps in multiples of 100. An error messages is generated if
an invalid value is entered.
Values 100 to 1000
time-interval — Specify the timer interval in seconds.
Values 1 to 300
ospf
Syntax ospf
Context tools>perform>router
Description This command enables the context to perform specific OSPF tasks.
Default none
ospf3
Syntax ospf3
Context tools>perform>router
Description This command enables the context to perform specific OSPF3 tasks.
Default none
refresh-lsas