Tools Configuration Commands
Page 1492 7750 SR OS Services Guide
Syntax refresh-lsas [lsa-type] [area-id]
Context tools>perform>router>ospf
Description This command refreshes LSAs for OSPF.
Default none
Parameters lsa-type — Specify the LSA type using allow keywords.
Values Keywords: router, network, summary, asbr, extern, nssa, opaque
area-id — The OSPF area ID expressed in dotted decimal notation or as a 32-bit decimal integer
Values 0 to 4294967295.
run-manual-spf
Syntax run-manual-spf externals-only
Context tools>perform>router>ospf
Description This command runs the Shortest Path First (SPF) algorithm.
Default none
Parameters externals-only — Specify the route preference for OSPF external routes.
security
Syntax security
Context tools>perform
Description This command provides tools for testing security.
authentication-server-check
Syntax authentication-server-check server-address ip-address [port port] user-name DHCP
client user name password password secret key [source-address ip-address] [timeout
seconds] [router router-instance]
Context tools>perform>security
Description This command checks connection to the RADIUS server.
Parameters router router-instance — Specifies the router name or service ID.
Values router-name: Base , management
service-id: 1 — 2147483647
Default Base
To Next Page
Loading...
