Virtual Leased Line Services
7750 SR OS Services Guide Page 237
service-id — The unique service identification number identifying the service in the service domain.
This ID must be unique to this service and may not be used for any other service of any type. The
service-id must be the same number used for every 7750 SR on which this service is defined.
service-id
Values 1 — 2147483647
customer-id
customer customer-id — Specifies the customer ID number to be associated with the service. This
parameter is required on service creation and optional for service editing or deleting.
Values 1 — 2147483647
vpn vpn-id — Specifies the VPN ID number which allows you to identify virtual private networks
(VPNs) by a VPN identification number.
vpn-id
Values 1 — 2147483647
Default null (0)
vc-type
vc-type — Specifies a 15 bit value that defines the type of the VC signaled to the peer. Its values are
defined in draft-ietf-pwe3-iana-allocation and it defines both the signaled VC type as well as the
resulting datapath encapsulation over the apipe.
Values fr-dlci
vc-switching — Specifies if the pseudowire switching signalling is used for the spoke SDPs
configured in this service.
ipipe
Syntax ipipe service-id [customer customer-id] [create] [vpn vpn-id] [vc-switching]
no ipipe service-id
Context config>service
Description This command configures an IP-Pipe service.
Parameters service-id — The unique service identification number identifying the service in the service domain.
This ID must be unique to this service and may not be used for any other service of any type. The
service-id must be the same number used for every SR on which this service is defined.
service-id
Values 1 — 2147483647
customer-id-ipipe
customer customer-id — Specifies the customer ID number to be associated with the service. This
parameter is required on service creation and optional for service editing or deleting.
Values 1 — 2147483647
vpn vpn-id — Specifies the VPN ID number which allows you to identify virtual private networks
(VPNs) by a VPN identification number.
vpn-id
Values 1 — 2147483647
Default null (0)
vc-switching — Specifies if the pseudowire switching signalling is used for the spoke SDPs
configured in this service.
To Next Page
Loading...
