VLL Service Configuration Commands
Page 292 7750 SR OS Services Guide
vci 1, 2, 5 — 65535
dlci 16 — 1022
Sample Output
*A:ALA-1# show service id 11 authentication statistics
===============================================================
Authentication statistics
===============================================================
Interface / SAP Authentication Authentication
Successful Failed
---------------------------------------------------------------
vpls-11-90.1.0.254 1582 3
---------------------------------------------------------------
Number of entries: 1
===============================================================
*A:ALA-1#
all
Syntax all
Context show>service>id
Description Displays detailed information for all aspects of the service.
Output Show All Service-ID Output — The following table describes the show all service-id command
output fields:
Label Description
Service Detailed Information
Service Id
The service identifier.
VPN Id
The number which identifies the VPN.
Service Type
Specifies the type of service.
VLL Type
Specifies the VLL type.
SDP Id
The SDP identifier.
Description
Generic information about the service.
Customer Id
The customer identifier.
Last Mgmt Change
The date and time of the most recent management-initiated change to
this customer.
SAP Count
The number of SAPs specified for this service.
SDP Bind Count
The number of SDPs bound to this service.
Split Horizon Group specifics
To Next Page
Loading...
