Virtual Leased Line Services
7750 SR OS Services Guide Page 293
Split Horizon
Group
Name of the split horizon group for this VPLS.
Description
Description of the split horizon group.
Last Changed
The date and time of the most recent management-initiated change to
this split horizon group.
Service Destination Points (SDPs)
SDP Id The SDP identifier.
Type
Indicates whether this Service SDP binding is a spoke or a mesh.
Admin Path MTU
The desired largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to
be fragmented.
Oper Path MTU
The actual largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to
be fragmented.
Delivery
Specifies the type of delivery used by the SDP: GRE or MPLS.
Admin State
The administrative state of this SDP.
Oper State
The operational state of this SDP.
Ingress Label
The label used by the far-end device to send packets to this device in
this service by this SDP.
Egress Label
The label used by this device to send packets to the far-end device in
this service by this SDP.
Ingress Filter
The ID of the ingress filter policy.
Egress Filter
The ID of the egress filter policy.
Far End
Specifies the IP address of the remote end of the GRE or MPLS tunnel
defined by this SDP.
Last Changed
The date and time of the most recent change to this customer.
Signaling
Specifies the signaling protocol used to obtain the ingress and egress
labels used in frames transmitted and received on this SDP.
Keepalive
Admin State
Specifies the admin. state of the keepalive protocol.
Oper State
Specifies the operational state of the keepalive protocol.
Hello Time
Specifies how often the SDP Echo Request messages are transmitted on
this SDP.
Hello Msg Len
Specifies the length of the SDP Echo Request messages transmitted on
this SDP.
Label Description (Continued)
To Next Page
Loading...
