Alcatel-Lucent 7750 SR OS - Page 417

Virtual Private LAN Services
7750 SR OS Services Guide Page 417
Figure 3: Example Configuration for Protected VPLS Spoke SDP
Use the following CLI syntax to create a management VPLS for spoke SDP protection:
CLI Syntax: config>service# sdp sdp-id mpls create
far-end ip-address
lsp lsp-name
no shutdown
CLI Syntax: vpls service-id customer customer-id [m-vpls] create
description description-string
mesh-sdp sdp-id:vc-id create
spoke-sdp sdp-id:vc-id create
stp
no shutdown
Example
: config>service# sdp 100 mpls create
config>service>sdp# far-end 10.0.0.30
config>service>sdp# lsp "toALA-B1"
config>service>sdp# no shutdown
config>service>sdp# exit
config>service# sdp 300 mpls create
config>service>sdp# far-end 10.0.0.20
config>service>sdp# lsp "toALA-A2"
config>service>sdp# no shutdown
STP
Running in
m-vpls
ALA-B1ALA-A1
Metro 2
MPLS
Network
Metro 1
MPLS
Network
ALA-B2
ALA-A2
M
M
M
M
M
M
M
M
1/1:1
300:1
100:10
100:10
100:1
100:10
100:10
100:1
100:1 100:1
300:1
300:1
300:1
SDP 300
SDP 100
block-on-mesh-failure
no block-on-mesh-failure
SDP 100
SDP 300
S
S
S
S
OSSG048
S
S
S
S
= vpls 1 (m-vpls)
= vpls 10 (user vpls)