Alcatel-Lucent 7750 SR OS - Page 418

Configuring a VPLS Service with CLI
Page 418 7750 SR OS Services Guide
config>service>sdp# exit
config>service# vpls 1 customer 1 m-vpls create
config>service>vpls# mesh-sdp 300:1 create
config>service>vpls>mesh-sdp# exit
config>service>vpls# no shutdown
config>service>vpls# spoke-sdp 100:1 create
config>service>vpls>spoke-sdp# exit
config>service>vpls# exit
The following example displays the VPLS configuration:
*A:ALA-A1>config>service# info
----------------------------------------------
...
sdp 100 mpls create
far-end 10.0.0.30
lsp "toALA-B1"
no shutdown
exit
sdp 300 mpls create
far-end 10.0.0.20
lsp "toALA-A2"
no shutdown
exit
vpls 101 customer 1 m-vpls create
spoke-sdp 100:1 create
exit
mesh-sdp 300:1 create
exit
stp
exit
no shutdown
exit
...
----------------------------------------------
*A:ALA-A1>config>service#