Virtual Private LAN Services
7750 SR OS Services Guide Page 543
When the send-query command is configured, all type of queries generate ourselves are of the
configured version. If a report of a version higher than the configured version is received, the report
gets dropped and a new “wrong version” counter is incremented.
If the send-query command is not configured, the version command has no effect. The version used
on that SAP or SDP will be the version of the querier. This implies that, for example, when there is a
v2 querier, a v3 group or group-source specific query when a host wants to leave a certain group will
never be sent.
Parameters version — Specify the IGMP version.
Values 1, 2, 3
to-sap
Syntax to-sap sap-id
no to-sap
Context config>service>vpls>sap>snooping>mvr
Description In some situations, the multicast traffic should not be copied from the MVR VPLS to the SAP on
which the IGMP message was received (standard MVR behaviour) but to another SAP.
This command configures the SAP to which the multicast data needs to be copied.
Default no to-sap
Parameters sap-id — Specifies the SAP to which multicast channels should be copied.
Values sap-id: null [port-id | bundle-id | bpgrp-id | lag-id | aps-id]
dot1q [port-id | bundle-id | bpgrp-id | lag-id | aps-id]:qtag1
qinq [port-id | bundle-id | bpgrp-id | lag-id]:qtag1.qtag2
atm [port-id | aps-id | bundle-id | bpgrp-id][:vpi/vci |vpi |vpi1.vpi2]
frame [port-id | bundle-id]:dlci
cisco-hdlc slot/mda/port.channel
port-id slot/mda/port[.channel]
aps-id aps-group-id[.channel]
aps keyword
group-id 1 — 64
bundle-type-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 — 128
bpgrp-id: bpgrp
-type-bpgrp-num
bpgrp keyword
type ima
bpgrp-num 1 — 1280
ccag-id ccag-id.path-id[cc-type]:cc-id
ccag keyword
id 1 — 8
path-id a, b
cc-type .sap-net, .net-sap]
cc-id 0 — 4094
To Next Page
Loading...
