Virtual Private LAN Services
7750 SR OS Services Guide Page 557
server
Syntax server server-index address ip-address secret key [hash | hash2] [port port-num]
no server server-index
Context config>service>pe-discovery-policy
Description This command adds a RADIUS server.
Parameters server-index — The index for the RADIUS server. The index determines the sequence in which the
servers are queried for authentication requests. Servers are queried in order from lowest to
highest index.
Values 1 — 5
address ip-address — The IP address of the RADIUS server. Two RADIUS servers cannot have the
same IP address. An error message is generated if the server address is a duplicate.
secret key — The secret key to access the RADIUS server. This secret key must match the password
on the RADIUS server.
Values Up to 20 characters in length.
hash — Specifies the key is entered in an encrypted form. If the hash parameter is not used, the key
is assumed to be in a non-encrypted, clear text form. For security, all keys are stored in encrypted
form in the configuration file with the hash parameter specified.
hash2 — Specifies the key is entered in a more complex encrypted form. If the hash2 parameter is
not used, the less encrypted hash form is assumed.
port — Specifies the UDP port number on which to contact the RADIUS server for authentication.
Values 1 — 65535
timeout
Syntax timeout seconds
no timeout
Context config>service>pe-discovery-policy
Description This command specifies the number of seconds to wait before timing out a RADIUS server.
The no form of the command reverts to the default value.
Default 3 seconds
Parameters seconds — The number of seconds to wait for a response from a RADIUS server, expressed as a
decimal integer.
Values 1 — 90
To Next Page
Loading...
