VPLS Service Configuration Commands
Page 558 7750 SR OS Services Guide
radius-discovery
Syntax [no] radius-discovery
Context config>service>vpls
Description This command enables the RADIUS provider edge discovery for this VPLS service.
Default none
pe-discovery-policy
Syntax pe-discovery-policy name
no pe-discovery-policy
Context config>service>vpls>radius-discovery
Description This command specifies the existing RADIUS PE discovery policy name. The policy must have been
configured in the config>service context.
Parameters name — Specifies the RADIUS PE discovery policy name, up to 32 characters in length.
user-name-format
Syntax user-name-format {vpn-id vpn-id | router-distinguisher rd}
no pe-discovery-policy
Context config>service>vpls>radius-discovery
Description This command specifies whether the RADIUS user name is a VPN ID or router-distinguisher.
Parameters vpn-id vpn-id — Indicates the VPN ID of the associated VPLS service.
router-distinguisher rd — Sets the identifier attached to routes that distinguishes the VPN it
belongs.
To Next Page
Loading...
