Internet Enhanced Services
7750 SR OS Services Guide Page 687
Configure IES interface spoke-SDP parameters
config>service>ies>if# spoke-sdp
spoke-sdp
Binds a service to an existing SDP. 762
egress
Enables the context to specify the egress filter policy and VC label value. 762
ingress
Enables the context to specify the ingress filter policy and VC label value. 763
filter
Associates an IP filter policy with an egress SAP or IP interface. 775
vc-label
Configures the VC label. 763
Configure IES redundant interface parameters
config>service>ies
redundant-interface
Configures a subscriber interface. 721
address
Assigns an IP address/IP subnet format and a remote IP to the interface. 721
description
A text string that describes the redudant interface. 718
no shutdown
Administratively enables the interface. 717
Configure SAP parameters 695
config>service>ies>interface
config>service>ies>sub-if>grp-if
sap sap-id
Creates a SAP within the IES service. 764
accounting-policy
Configures the accounting policy that applies to the SAP. 774
anti-spoof
Enables anti-spoof filtering and optionally changes the anti-spoof match-
ing type for the SAP.
732
atm
Enables access to the context to configure ATM-related attributes only in
the config>service>ies>interface context.
792
collect-stats
Enables the collection of accounting and statistical data for the SAP or net-
work port.
774
egress
Configures egress SAP QoS policies and filter policies. 776
host
Creates a static subscriber host for the SAP. 740
ingress
Configures ingress SAP QoS policies and filter policies. 776
multiservice-site
Specifies the multi-service-site to which this SAP belongs. 767
no shutdown
Administratively enables the SAP. 717
Configure SAP ATM parameters
config>service>ies>if>sap>atm
atm
Enables access to the context to configure ATM-related attributes. 792
egress
Configures egress ATM attributes for the SAP. 792
Table 1: CLI Commands to Configure IES Service Parameters (Continued)
Command Description Page
To Next Page
Loading...
