Alcatel-Lucent 7750 SR OS - Page 809

Internet Enhanced Services
7750 SR OS Services Guide Page 809
1 102:1 Mesh 0 0
1 103:1 Mesh 0 0
1 104:1 Mesh 0 0
1 105:1 Mesh 0 0
1 106:1 Mesh 0 0
1 107:1 Mesh 0 0
1 108:1 Mesh 0 0
1 300:1 Mesh 0 0
1 301:1 Mesh 0 0
1 302:1 Mesh 0 0
1 400:1 Mesh 0 0
1 500:2 Spok 131070 2001
1 501:1 Mesh 131069 2000
100 300:100 Spok 0 0
200 301:200 Spok 0 0
300 302:300 Spok 0 0
400 400:400 Spok 0 0
------------------------------------------------------------------------------
Number of Bindings Found : 23
------------------------------------------------------------------------------
*A:ALA-12#
sap-using
Syntax sap-using [sap sap-id]
sap-using interface [ip-address | ip-int-name]
sap-using [ingress|egress] atm-td-profile td-profile-id
sap-using [ingress|egress] filter filter-id
sap-using [ingress|egress] qos-policy qos-policy-id
sap-using authentication-policy policy-name
Context show>service
Description Displays SAP information.
If no optional parameters are specified, the command displays a summary of all defined SAPs.
The optional parameters restrict output to only SAPs matching the specified properties.
Parameters sap sap-id — Specifies the physical port identifier portion of the SAP definition.
ingress — Specifies matching an ingress policy.
egress — Specifies matching an egress policy.
qos-policy qos-policy-id — The ingress or egress QoS Policy ID for which to display matching
SAPs.
Values 1 — 65535
atm-td-profile td-profile-id — Displays SAPs using this traffic description.
filter filter-id — The ingress or egress filter policy ID for which to display matching SAPs.
Values 1 — 65535
authentication policy-name — The session authentication policy for which to display matching
SAPs.
sap sap-id — Specifies the physical port identifier portion of the SAP definition.