Internet Enhanced Services
7750 SR OS Services Guide Page 833
Syntax neighbors group [name] [ip-address]
Context show>service>id>gsmp
Description This command displays GSMP neighbor information.
Parameters group — A GSMP group defines a set of GSMP neighbors which have the same properties.
name — Specifies a GSMP group name is unique only within the scope of the service in which it is
defined.
ip-address — Specifies the ip-address of the neighbor.
Sample Output
These commands show the configured neighbors per service, regardless of the fact there exists an
open TCP connection with this neighbor. The admin state is shown because for a neighbor to be
admin enabled, the service, gsmp node, group node and the neighbor node in this service must all be
in 'no shutdown' state. Session gives the number of session (open TCP connections) for each
configured neighbor.
A:active>show>service>id>gsmp# neighbors
============================================================================
GSMP neighbors
============================================================================
Group Neigbor AdminState Sessions
----------------------------------------------------------------------------
dslam1 192.168.1.2 Enabled 0
dslam1 192.168.1.3 Enabled 0
----------------------------------------------------------------------------
Number of neighbors shown: 2
============================================================================
A:active>show>service>id>gsmp#
A:active>show>service>id>gsmp# neighbors group dslam1
============================================================================
GSMP neighbors
============================================================================
Group Neigbor AdminState Sessions
----------------------------------------------------------------------------
dslam1 192.168.1.2 Enabled 0
dslam1 192.168.1.3 Enabled 0
----------------------------------------------------------------------------
Number of neighbors shown: 2
============================================================================
A:active>show>service>id>gsmp#
A:active>show>service>id>gsmp# neighbors group dslam1 192.168.1.2
============================================================================
GSMP neighbors
============================================================================
Group Neigbor AdminState Sessions
----------------------------------------------------------------------------
dslam1 192.168.1.2 Enabled 0
============================================================================
A:active>show>service>id>gsmp#
To Next Page
Loading...
