Alcatel-Lucent 7750 SR OS - Page 911

Virtual Private Routed Network Services
7750 SR OS Services Guide Page 911
VPRN BGP CLI Syntax
Use the CLI syntax to configure VPRN BGP parameters (BGP Configuration Commands on page
939).
The following displays the command usage to configure VPRN BGP parameters:
Example: config>service>vprn# bgp
config>service>vprn>bgp# router-id 10.0.0.1
config>service>vprn>bgp# group to-cel
config>service>vprn>bgp>group# export vprnBgpExpPolCust1
config>service>vprn>bgp>group# peer-as 65101
config>service>vprn>bgp>group# neighbor 10.1.1.2
config>service>vprn>bgp>group>neighbor# exit
The following example displays the VPRN BGP configuration:
*A:ALA-1>config>service# info
----------------------------------------------
..
vprn 1 customer 1 create
vrf-import "vrfImpPolCust1"
vrf-export "vrfExpPolCust1"
ecmp 8
autonomous-system 10000
route-distinguisher 10001:1
auto-bind ldp
vrf-target target:10001:1
interface "to-ce1" create
address 11.1.0.1/24
sap 1/1/10:1 create
ingress
scheduler-policy "SLA2"
qos 100
exit
egress
scheduler-policy "SLA1"
qos 1010
filter ip 6
exit
exit
exit
static-route 6.5.0.0/24 next-hop 10.1.1.2
bgp
router-id 10.0.0.1
group "to-cel"
export "vprnBgpExpPolCust1"
peer-as 65101
neighbor 10.1.1.2
exit
exit
exit
spoke-sdp 2 create
exit
no shutdown
exit
...
----------------------------------------------
*A:ALA-1>config>service#