VPRN Service Configuration Commands
Page 958 7750 SR OS Services Guide
local-address
Syntax local-address ip-address
no local-address
Context config>service>vprn>gsmp>group>neighbor
Description This command configures the source ip-address used in the connection towards the neighbor.
Parameters ip-address — Specify the IP address in dotted decimal notation.
priority-marking
Syntax priority-marking dscp dscp-name
priority-marking prec ip-prec-value
no priority-marking
Context config>service>vprn>gsmp>group>neighbor
Description This command configures the type of priority marking to be used.
Parameters dscp dscp-name — Specifies the DSCP code-point to be used.
Values be, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cs1, cp9, af11, cp11, af12, cp13, af13, cp15,
cs2, cp17, af21, cp19, af22, cp21, af23, cp23, cs3, cp25, af31, cp27, af32, cp29,
af33, cp31, cs4, cp33, af41, cp35, af42, cp37, af43, cp39, cs5, cp41, cp42, cp43,
cp44, cp45, ef, cp47, nc1, cp49, cp50, cp51, cp52, cp53, cp54, cp55, nc2, cp57,
cp58, cp59, cp60, cp61, cp62, cp63
prec ip-prec-value — Specifies the precedence value to be used.
Values 0 — 7
igmp
Syntax igmp
Context config>service>vprn
Description This command enables the context to configure IGMP connections maintained in this service.
Default not enabled
interface
Syntax interface ip-int-name
no interface
Context config>service>vprn>igmp
Description This command enables the context to configure IGMP connections maintained in this service.
To Next Page
Loading...
