Virtual Private Routed Network Services
7750 SR OS Services Guide Page 959
Parameters ip-int-name — Specifies the name of the IP interface. Interface names can be from 1 to 32
alphanumeric characters. If the string contains special characters (#, $, spaces, etc.), the entire
string must be enclosed within double quotes.
Values 1 — 32 characters maximum
import
Syntax import policy-name
no import
Context config>service>vprn>igmp>interface
Description This command imports a policy to filter IGMP packets. The no form of the command removes the
policy association from the IGMP instance.
Default no import — No import policy specified.
Parameters policy-name — The import route policy name. Allowed values are any string up to 32 characters long
composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
The specified name(s) must already be defined.
max-groups
Syntax max-groups value
no max-groups
Context config>service>vprn>igmp>interface
Description This command specifies the maximum number of groups for which IGMP can have local receiver
information based on received IGMP reports on this interface. When this configuration is changed
dynamically to a value lower than the currently accepted number of groups, the groups that are
already accepted are not deleted. Only new groups will not be allowed.
Default 0, no limit to the number of groups.
Parameters value — Specifies the maximum number of groups for this interface.
Values 1 — 16000
mcac
Syntax mcac
Context config>service>vprn>interface
config>service>vprn>pim>if
Description This command configures multicast CAC policy and constraints for this interface.
Default none
To Next Page
Loading...
