VPRN Services Command Reference
Page 1132 7750 SR OS Services Guide
IPSec Configuration Commands
config
— service
— vprn service-id [customer customer-id]
—no vprn service-id
— ipsec
— security-policy security-policy-id [create]
—no security-policy security-policy-id
— entry entry-id [create]
—no entry entry-id
— local-ip {ip-prefix/prefix-length | ip-prefix netmask |
any}
— remote-ip {ip-prefix/prefix-length | ip-prefix netmask |
any}
— ipsec-interface ip-int-name [create]
—no ipsec-interface ip-int-name
— [no] address {ip-address/mask | ip-address netmask}
— description description-string
—no description
— ip-mtu octets
—no ip-mtu
— sap sap-id [create
]
—no sap sap-id
— description description-string
—no description
— egress
— agg-rate-limit agg-rate [queue-frame-based-
accounting]
—no agg-rate-limit agg-rate
— filter ip ip-filter-id
—no filter [ip ip-filter-id]
— [no] qinq-mark-top-only
— qos policy-id
—no qos [policy-id]
— [no] queue-override
— [no] queue queue-id
— adaptation-rule [pir adaptation-rule] [cir
adaptation-rule]
—no adaptation-rule
— avg-frame-overhead percentage
—no avg-frame-overhead
— cbs size-in-kbytes
—no cbs
— high-prio-only percent
—no high-prio-only
— mbs
{size-in-kbytes | default}
—no mbs
— rate pir-rate [cir cir-rate]
—no rate
— [no] scheduler-override
— [no] scheduler scheduler-name
— rate pir-rate [cir cir-rate]
—no rate
— scheduler-policy scheduler-policy-name