Subscriber Services
7750 SR OS Services Guide Page 127
SDP Commands
config
— service
— sdp sdp-id [gre | mpls]
—no sdp sdp-id
— accounting-policy acct-policy-id
—no accounting-policy
— [no] adv-mtu-override
—[no] bgp-tunnel
— booking-factor percentage
—no booking-factor
— class-forwarding [default-lsp lsp-name]
—no class-forwarding
— [no] enforce-diffserv-lsp-fc
— fc {be | l2 | af | l1 | h2 | ef | h1 | nc} lsp lsp-name
—no fc {be | l2 | af | l1 | h2 | ef | h1 | nc}
— multicast-lsp lsp-name
—no multicast-lsp
— [
no] shutdown
— [no] collect-stats
— description description-string
—no description
— far-end ip-address
—no far-end
— keep-alive
— hello-time seconds
—no hello-time
— hold-down-time seconds
—no hold-down-time
— max-drop-count count
—no max-drop-count
— message-length octets
—no message-length
— [no] shutdown
— timeout timeout
—no timeout
— [no] ldp
— [no] lsp lsp-name
— metric metric
—no metric
— [no] mixed-lsp-mode
— [no] sdp-revert-time seconds | infinite
— network-domain
network-domain-name
—no network-domain
— path-mtu octets
—no path-mtu
— pbb-etype [0x0600..0xffff]
—no pbb-etype
— [no] shutdown
— signaling [off | tldp|bgp]
— vlan-vc-etype 0x0600..0xffff