Virtual Leased Line Services
7750 SR OS Services Guide Page 321
VLL Service Configuration Commands
• Generic Commands on page 321
• VLL Global Commands on page 323
• VLL SAP Commands on page 333
• VLL Frame Relay Commands on page 376
• VLL SDP Commands on page 379
• Cpipe Commands on page 392
• CES SAP Commands on page 394
• VLL SDP Commands on page 379
Generic Commands
shutdown
Syntax [no] shutdown
Context config>service>apipe
config>service>apipe>sap
config>service>apipe>spoke-sdp
config>service>cpipe
config>service>cpipe>sap
config>service>cpipe>spoke-sdp
config>service>epipe
config>service>epipe>sap
config>service>epipe>spoke-sdp
config>service>epipe>sap>eth-cfm>mep
config>service>epipe>spoke-sdp>eth-cfm>mep
config>service>fpipe
config>service>fpipe>sap
config>service>fpipe>spoke-sdp
config>service>ipipe
config>service>ipipe>sap
config>service>ipipe>spoke-sdp
Description This command administratively disables an entity. When disabled, an entity does not change, reset, or
remove any configuration settings or statistics.
The operational state of the entity is disabled as well as the operational state of any entities contained
within. Many objects must be shut down before they may be deleted.
Services are created in the administratively down (shutdown) state. When a no shutdown command
is entered, the service becomes administratively up and then tries to enter the operationally up state.
Default administrative states for services and service entities is described below in Special Cases.
To Next Page
Loading...
