Virtual Leased Line Services
7750 SR OS Services Guide Page 347
ETH-CFM Service Commands
eth-cfm
Syntax
eth-cfm
Context config>service>vpls>mesh-sdp
config>service>vpls>spoke-sdp
config>service>vpls
config>service>vpls>sap
Description This command enables the context to configure ETH-CFM parameters.
eth-tunnel
Syntax eth-tunnel
Context config>service>epipe>sap
config>service>ipipe>sap
Description The command enables the context to configure Ethernet Tunnel SAP parameters.
path
Syntax path path-index tag qtag[.qtag]
no path path-index
Context config>service>epipe>sap>eth-tunnel
config>service>ipipe>sap>eth-tunnel
Description This command configures Ethernet tunnel SAP path parameters.
The no form of the command removes the values from the configuration.
Default none
Parameters path-index — Specifies the path index value.
Values 1 — 16
tag qtag[.qtag] — Specifies the qtag value.
Values 0 — 4094, *
Syntax eth-cfm
Context config>service>epipe>spoke-sdp
config>service>epipe>sap
config>service>ies>sub-if
To Next Page
Loading...
