Table 29. System Setup options—Connection menu(continued)
Connection
NOTE: To view this option, enable Advanced Setup mode as described in View
Advanced Setup options.
Table 30. System Setup options—Power menu
Power
USB PowerShare
Enable USB PowerShare Enables external devices to be powered or charged using the stored computer
battery. Devices must be connected through the designated USB PowerShare port
on the computer.
By default, the Enable USB PowerShare option is off.
NOTE: To view this option, enable Advanced Setup mode as described in View
Advanced Setup options.
USB Wake Support
Enable USB Wake Support Enables or disables USB devices like a mouse or keyboard to wake the computer
from Standby, Hibernation, or Power Off.
NOTE: This feature requires Deep Sleep Control to be disabled.
By default, the Enable USB Wake Support option is on.
NOTE: To view this option, enable Advanced Setup mode as described in View
Advanced Setup options.
AC Behavior
AC Recovery Sets what action the computer takes when power is restored after an unexpected loss
of power.
By default, the AC Recovery option is set to Power Off.
NOTE: To view this option, enable Advanced Setup mode as described in View
Advanced Setup options.
Block Sleep Enables or disables the computer from entering Sleep (S3) mode in the operating
system.
By default, the Block Sleep option is disabled.
NOTE: When enabled, the computer does not go to Sleep, Intel Rapid Start is
disabled automatically, and the operating system power option is blank if it was
set to Sleep.
NOTE: To view this option, enable Advanced Setup mode as described in View
Advanced Setup options.
Deep Sleep Control
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
By default, the Deep Sleep Control option is Enabled in S4 and S5.
Intel Speed Shift Technology Enables or disables the Intel Speed Shift Technology support. When enabled, the
operating system selects the appropriate processor performance automatically.
By default, the Intel Speed Shift Technology option is enabled.
NOTE: To view this option, enable Service options as described in View Service
options.
BIOS Setup 151
To Next Page
Loading...
