EasyManua.ls Logo

Alienware Area-51 AAT2250 - Power-Supply Unit Connectors; Video

Alienware Area-51 AAT2250
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 11. Power ratings(continued)
Description Option one Option two
Input current (maximum) 11.50 A 13.50 A
Output current (continuous) 12 V1/24 A, 12 V2/36 A, 12 V3/40 A, 12
VSB/5 A
12 V1/32 A, 12 V2/44 A, 12 V3/90 A, 12
VSB/5 A
Rated output voltage 12 V1, 12 V2, 12 V3, 12 VSB 12 V1, 12 V2, 12 V3, 12 VSB
Operating temperature range 5°C–45°C (41°F–113°F) 5°C–45°C (41°F–113°F)
Storage temperature range -40°C-70°C (-40°F–158°F) -40°C–70°C (-40°F–158°F)
Power-supply unit connectors
The following table lists the power-supply unit connectors that are supported on your Alienware Area-51 AAT2250.
Table 12. Power-supply unit connectors
Power-supply unit Power-supply unit connecters
ATX12VO 850 W Gold
One 8-pin connector for the processor
One 10-pin connector for the system board
One 6-pin connector for AUX
One 8-pin connector for DATA
One 12-pin + 4-pin connector for the graphics card
ATX12VO 1500 W Platinum
One 8-pin and one 4-pin connector for the processor
One 10-pin connector for the system board
One 6-pin connector for AUX
One 8-pin connector for DATA
Two 12-pin + 4-pin connectors for the graphics card
Video
The following table lists the detailed discrete graphics specifications on your Alienware Area-51 AAT2250.
NOTE: For proper functioning of four monitors on your computer with the below graphic cards, to ensure that the display
pixel clock speed remains below 1335 MHz. If the pixel clock speed of one display exceeds 1335 MHz, only three monitors
are displayed. Similarly, if the pixel clock speed of more than two displays exceed 1335 MHz, a maximum of two monitors are
displayed.
NOTE: The computer is equipped with a Thunderbolt 4 port that supports DisplayPort functionality. However, since the
computer always has a discrete graphics card that is installed, the primary video detection sequence is set to prioritize the
discrete graphics card. Therefore, when a monitor is connected to the onboard Thunderbolt 4 port, it will not be displayed in the
preboot environment (BIOS setup and shell mode).
Table 13. Discrete graphics specifications
Controller Number
of cards
External display
support
Memory size Memory type PCIe version Power
consumption
Recommende
d PSU
NVIDIA
GeForce RTX
4070 SUPER
1
Three
DisplayPort
1.4 ports
One HDMI 2.1
port
12 GB GDDR6X 4 220 W >= 500 W
NVIDIA
GeForce RTX
1
Three
DisplayPort
1.4 ports
16 GB GDDR6X 4 285 W >= 750 W
Specifications of Alienware Area-51 AAT2250 25

Table of Contents

Related product manuals