Maintenance
Motor Overload Protector
For Energy Conservation
The dryer's motor overload protector stops the motor
automatically in the event
of
an overload. After
cooling, the overload protector will reset itself. Dryer
can
be
restarted by pressing the START pad.
If
overload protector cycles again, remove the dryer
from use and call the service person to correct the
problem.
• Make sure the lint filter is always clean.
• Do not overload dryer.
• Do not overdry clothes.
• Remove items to be ironed while still damp.
• Large loads
of
similar fabrics dry the most
efficiently. However, dry permanent press in
smaller loads to prevent wrinkling.
• Use the correct temperature FABRIC
SELECTOR setting for the type
of
fabric being
dried.
• Locate your dryer so the exhaust duct is as short
and straight as possible.
•
Do
not open the door during the drying cycle.
• Plan to do your laundry on low humidity days;
your clothes will dry faster.
• Should you plan to dry several loads, do them
one after another, then you do not have to reheat
the dryer unit's interior parts each time.
513082
© Copyright, Alliance Laundry Systems LLC - DO
NOT
COpy
or
TRANSMIT
29
To Next Page
Loading...
