Programming Control
15.
Temperature
"tEP-"
This option allows the owner to set the temperature
of
the heat cycles.
How
to
Program Temperature
1.
Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the
LOW
TEMP (!\) or the
DELICATES
(v)
keypad until
"Prog"
appears in
the display. Press the START (enter) keypad and
"AtSH" will appear in the display.
3. Press the
LOW
TEMP (!\)
or
the
DELICATES
(v)
keypad to scroll through the
programmable options until
"tEP-" appears
in
the display.
4. When
"tEP-" appears in the display, press the
START (enter) keypad. There are four
programmable temperature options.
Refer to
Table 9.
Display
Temperature Options
"tEP1" High Temperature
"tEP2"
Medium Temperature
"tEP3"
Low
Temperature
"tEP4"
Delicates Temperature
Table
9
5. Press the LOW TEMP (!\) or the
DELICATES
(v)
keypad
to
select the desired
temperature option.
6.
Press the START (enter) keypad when the correct
option appears
in
the display. Refer to Table
10
for values.
Temperature Options
lOO°F
(38°e)
lO5°F (41°C)
HO°F (43°C)
115°F (46°C)
120°F (49°C)
125°F (52°C)
130°F (54°C)
135°F (57°C)
140°F (60°C)
145°F (62°C)
150°F (66°C)
155°F (68°C)
160°F (71°C)
Table
10
NOTE:
The
devault values are as follows:
High Temperature =160°F (71°C)
Medium Temperature
=155°F (68°C)
Low Temperature
=145°F (62°C)
Delicates Temperature
=115°F (46°C)
7.
Press the LOW TEMP (!\)
or
the
DELICATES
(v)
keypad to increase
or
decrease
the current number
of
degrees displayed in the
display to the desired number
of
degrees.
8. Press the START (enter) keypad when the correct
number
of
degrees appears in the display. The
new value is saved and the next option in the
parameter will appear in the display.
NOTE:
To
program the next option, "t FC"
(Temperature [Fahrenheit/Celsius]), press the
MED
TEMP
«)
keypad until
"tEP-"
is displayed,
then press the
LOW
TEMP
(A)
or
DELICATES
(v)
keypad until
''t
FC" appears
in
the display
and
refer
to
option 16.
To
program
other
options, refer
to the appropriate section.
How
to
Exit Programming Feature
Press the MED TEMP
«)
keypad until the control
returns to Ready Mode.
38
© Published by permission
of
the copyright owner - DO NOT COPY
or
TRANSMIT
513001
To Next Page
Loading...
