Manual Reset
This feature allows the owner to reset the dryer
control's programming data to the factory default
settings by pressing a sequence
of
pads on the control.
For an explanation
of
the Factory Default Settings,
refer to
Default Dryer Settings.
How
to Enter Manual Reset
1.
Control must be in Manual Mode to start.
Refer to
Entering the
Manual
Mode.
2. Press the LOW TEMP
(1\)
or the
DELICATES
(v)
keypad until "rSEt" appears.
3. Press the START (enter) keypad.
The
control will
be
blank until the programming is complete.
Once the program has been reset, the control will
revert back to the Manual Mode, displaying
"diAg".
513001
© Published
by
permission
of
the copyright owner -
DO
NOT
COpy
or
TRANSMIT
65
To Next Page
Loading...
