Programming Control
20. Special Vend B Days Enable
"SPb-"
This option allows the owner to enable or disable a
second special vend.
Special Vend B can be programmed using
an
external
device or network.
The owner may also turn the Special Vend B option
on
or
off
if
desired.
How
to
Program Special Vend B Days
Enable
1.
Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2.
Press the LOW TEMP
(1\)
or
the
DELICATES
(v)
keypad until "Prog" appears in
the display. Press the START (enter) keypad and
"AtSH" will appear in the display.
3.
Press the LOW TEMP
(1\)
or the
DELICATES
(v)
keypad to scroll through the
programmable options until
"SPb-" appears in
the display.
4.
When "SPb-" appears in the display, press the
START (enter) keypad. The control displays
"on" or "oFF" for this parameter.
NOTE:
The
default value is oFF.
5. Press the LOW TEMP
(1\)
or the
DELICATES
(v)
keypad to select "on" or
"oFF".
6.
Press the START (enter) keypad when the
desired status appears in the display. The new
value is saved and the next option, "SPC-", will
appear in the display.
NOTE:
To
program
"SPC·" (Special Vend C Days
Enable),
refer
to
option 21. To
program
other
options,
refer
to
the
appropriate
section.
How
to
Exit Programming Feature
Press the MED TEMP «) keypad until the control
returns to Ready Mode.
21. Special Vend C Days Enable
"SPC-"
This option allows the owner to enable or disable a
third special vend.
Special Vend C can be programmed using an external
device or network.
The owner may also turn the Special
Vend C option on
or
off
if
desired.
How
to
Program Special Vend C Days
Enable
1.
Control must
be
in Manual Mode. Refer to
Entering the Manual Mode.
2.
Press the LOW TEMP
(1\)
or the
DELICATES
(v)
keypad until "Prog" appears in
the display. Press the START (enter) keypad and
"AtSH"
will appear in the display.
3.
Press the LOW TEMP
(1\)
or
the
DELICATES
(v)
keypad to scroll through the
programmable options until
"SPC-" appears in
the display.
4.
When "SPC-" appears in the display, press the
START (enter) keypad. The control displays
"on"
or
"oFF" for this parameter.
NOTE:
The
default
value is oFF.
5. Press the LOW TEMP
(1\)
or
the
DELICATES
(v)
keypad to select "on" or "off'.
6.
Press the START (enter) keypad when the
desired status appears in the display. The new
value is saved and the next option,
"SPd-", will
appear
in the display.
NOTE:
To
program
"SPd·"
(Special Vend D Days
Enable),
refer
to
option 22. To
program
other
options,
refer
to
the
appropriate
section.
How
to
Exit Programming Feature
Press the MED TEMP
«)
keypad until the control
returns to Ready Mode.
56
@ Published
by
pennission
of
the copyright owner - DO NOT
COPY
or
TRANSMIT
513001
To Next Page
Loading...
