Programming Control
16. Temperature (Fahrenheit!
Celsius)
"t
FC"
This option allows the owner to set whether the
display will
be shown in Fahrenheit or Celsius.
How
to
Program Temperature
(Fahrenheit/Celsius)
1.
Control must
be
in
Manual Mode. Refer to
Entering the Manual Mode.
2. Press the
LOW
TEMP
(1\)
or the
DELICATES
(v) keypad until "Prog" appears in
the display. Press the START (enter) keypad and
"AtSH" will appear in the display.
3. Press the
LOW
TEMP (I\) or the
DELICATES
(v)
keypad to scroll through the
programmable options until
"t
FC"
appears in
the display.
4. When
"tFC"
appears in the display, press the
START (enter) keypad. A number will appear in
the display. This number (found below)
corresponds to the current Temperature
(F ahrenheitiCelsius) setting.
One
(1) Celsius
Zero (0)
=Fahrenheit
NOTE:
The
default value is
O.
5. Press the LOW TEMP
(1\)
or the
DELICATES
(v)
keypad to increase or decrease
the current number to the desired number.
6. Press the START ( enter) keypad when the correct
number appears in the display. The new value is
saved and the next option,
"AtSn", will appear in
the display.
NOTE:
To
program
"AtSn"
(No
Heat
Vend Price),
refer
to
option 17.
To
program
other
options, refer
to
the appropriate section.
How
to
Exit Programming Feature
Press the MED TEMP «) keypad until the control
returns to Ready Mode.
513001
@ Published
by
permission
of
the copyright
owner
- DO NOT COPY
or
TRANSMIT .
39
To Next Page
Loading...
