Special Features
Start Pulse Operation
The control will accept pulses from optional payment
systems.
The
machine can
be
programmed to receive a
single start pulse or multiple start pulses, or the Start
Pulse Option can
be turned off. The Start Pulse Mode
allows the machine to go from the "Ready" mode to
the "START" mode after single or mUltiple pulses are
received.
Service Door and Coin Vault
Openings
The
control will capture the times and dates
of
the
openings
of
the Coin Vault and the Service Door. The
information is saved
in
memory.
An
open service door
combined with various keypad presses allows the
control
to
enter manual modes
of
operation
if
the
Break-In Alarm is not on. These modes include Manual
Programming, Audit Collection, Diagnostics, Rapid
Advance, and reset to factory defaults.
Special Vend
This feature allows the owner to program the control
to allow programmable vend prices for specific hours
and dates.
For details on programming Special
Vend, refer to
Programming Control.
OPL Mode
This feature allows the user to start a cycle without
satisfying the vend price.
Press the START keypad to add time to the cycle.
Press the
LOW TEMP and DELI CATES keypads to
end the cycle.
For details on enabling
OPL Mode, refer to
Programming Control.
Drop-Off Mode
This feature allows the owner
to
limit machine use to
an attendant without requiring vend. Starting the
machine will require the correct sequence
of
four
keypad presses as programmed
by
an external device
or a network.
Press the START keypad to add time to the cycle.
Press the LOW TEMP and DELI CATES keypads to
end the cycle.
For details on enabling Drop-Off Mode, refer to
Programming ControL
Low Power/Auto-Shutdown Option
This feature allows the owner to program the control
to shut down
or
enter a low power consumption mode
based on programmable times and dates
ifeither
of
these options are enabled.
For
details
on
programming the Low Power! Auto-
Shutdown option, refer to
Programming Control.
513001
@ Published by permission
of
the copyright owner - DO
NOT
COPY
or
TRANSMIT
11
To Next Page
Loading...
