Programming Control
19.
Special Vend A Data "SPA-"
This option allows the owner to set the
day
or
days
of
a special vend.
Special Vend A is used to change the standard vend
prices for special occasions.
The
special vend
can
be
programmed to start and end
on
a specific day
or
days
of
the week.
The
owner
may
also tum the Special Vend A option
on
or
off
if
desired.
How
to
Program Special Vend A Days
Enable "SA01"
1.
Control must
be
in
Manual Mode. Refer to
Entering the Manual Mode.
2. Press the
LOW
TEMP
(1\)
or
the
DELICATES
(v)
keypad until "Prog" appears
in
the display. Press the START (enter) keypad and
"AtSH" will appear
in
the display.
3.
Press the LOW TEMP
(1\)
or
the
DELICATES
(v)
keypad to scroll through the
programmable options until "SPA-" appears in
the display. Press the START (enter) keypad and
"SA01" will appear in the display.
4.
When
"SA01" appears in the display, press the
START (enter) keypad. A number will appear
in
the display that corresponds to the current
Special Vend A Days Enable Programming
Value.
5. Locate the desired number
in
the first column
of
Table
12 on the following pages.
6.
Press
the
LOW
TEMP
(1\)
or
the
DELICATES
(v)
keypad to increase
or
decrease
the
current number until correct.
7. Press the START (enter) keypad when the correct
number appears
in
the display.
The
new
value is
saved and the next Special Vend A option,
"SA02", will appear in the display.
NOTE:
To
program
"SA02" (Special Vend A
Start
Hour), continue to the next Special Vend A option.
To
program
other
options, press the MED
TEMP
«)
keypad
and
refer to the
appropriate
section.
How
to
Exit Programming Feature
Press the MED
TEMP
«)
keypad until the control
returns to Ready Mode.
42
© Published
by
pennission
of
the copyright owner -
DO
NOT
COPY
or
TRANSMIT
513001
To Next Page
Loading...
