Programming Control
25. Low Power/Auto Shutdown B
Days Enable
"LPSb"
This option allows the owner to enable or disable Low
Power! Auto Shutdown. Low Power
or
Auto Shutdown
duration are programmed using an external device or
network.
How
to
Program the
Low
Power/Auto
Shutdown B Days Enable
1.
Control must
be
in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the LOW TEMP (!\) or the
DELICATES
(v)
keypad until
"Prog"
appears in
the display. Press the START (enter) keypad and
"AtSH" will appear in the display.
3. Press the LOW TEMP
(!\) or the
DELI CATES
(v)
keypad to scroll through the
programmable options until
"LPSb" appears in
the display.
4. When
"LPSb" appears in the display, press the
START (enter) keypad. The current Low Power!
Auto Shutdown B Days Enable status will appear
in the display.
"on"
= Option Enabled
"oFF"
= Option Disabled
NOTE: The default value is oFF.
5. Press the LOW TEMP (!\) or the
DELICATES
(v)
keypad to change the current
status.
6.
Press the START (enter) keypad when the
desired status appears in the display. The new
value is saved and the next option,
"LPSC", will
appear in the display.
NOTE:
To
program
"LPSC" (Low Power!Auto
Shutdown C Days Enable), refer to
option 26.
To
program
other
options, refer to the appropriate
section.
How
to
Exit Programming Feature
Press the MED TEMP
«)
keypad until the control
returns to Ready Mode.
26. Low Power/Auto Shutdown C
Days Enable "LPSC"
This option allows the owner to enable or disable Low
Power! Auto Shutdown. Low Power or Auto Shutdown
duration are programmed using an external device or
network.
How
to
Program the Low Power/Auto
Shutdown C Days Enable
1.
Control must
be
in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the LOW TEMP (!\) or the
DELICATES
(v)
keypad until
"Prog"
appears in
the display. Press the START (enter) keypad and
"AtSH" will appear in the display.
3. Press the LOW TEMP
(!\) or the
DELICATES
(v)
keypad to scroll through the
programmable options until
"LPSC" appears in
the
display.
4. When
"LPSC" appears in the display, press the
START (enter) keypad. The current Low Power!
Auto Shutdown C Days Enable status will appear
in the display.
"on"
Option Enabled
"oFF"
= Option Disabled
NOTE:
The
default value is oFF.
5. Press the LOW TEMP (!\)
or
the
DELICATES
(v)
keypad to change the current
status.
6. Press the START (enter) keypad when the
desired status appears in the display. The new
value is saved and the next option,
"LPSd", will
appear in the display.
NOTE:
To
program
"LPSd" (Low Power/Auto
Shutdown D Days Enable), refer to
option 27.
To
program
other
options, refer to the appropriate
section.
How
to
Exit Programming Feature
Press the MED TEMP «) keypad until the control
returns to Ready Mode.
513001
© Published
by
permission
of
the copyright owner - DO
NOT
COpy
or
TRANSMIT
59
To Next Page
Loading...
