Risers
Risers (or air cushions) may have to
be
installed
if
the
pipes knock or pound when flow
of
water stops. The
risers are more efficient when installed as close as
possible to the water supply faucets (refer to
Figure 5).
1
2
W0051
1 Risers (Air Cushions)
2 Water Supply
Faucets
Figure 5
Installation
Step
3:
Connect Drain Hose to Drain
Receptacle
Remove the drain hose from its shipping position on
the rear
of
the washer
by
removing the shipping tape.
IMPORTANT: Drain receptacle must be capable
of
handling a minimum
00.5
cm (1-3/8 inch) outside
diameter
drain
hose.
FLW1978N
1 Shipping
Tape
Figure 6
803363
© Copyright, Alliance Laundry Systems
LLC
-
DO
NOT
COPY or TRANSMIT
9
To Next Page
Loading...
