Programming Control
17. No Heat Vend Price "AtSn"
This option allows the owner to set the vend price for a
NO
HEAT
cycle. This vend price will be shown in the
display when
NO
HEAT is selected.
How to Program No Heat Vend Price
1.
Control must be in Manual Mode. Refer to
Entering the
Manual
Mode.
2. Press the LOW TEMP (/\)
or
the
DELICATES
(v)
keypad until
"Prog"
appears in
the display. Press the START (enter) keypad, and
"AtSH" will appear in the display.
3. Press the LOW TEMP (/\) or the
DELICATES
(v)
keypad to scroll through the
programmable options until
"AtSn" appears in
the display.
4. When
"AtSn" appears in the display, press the
START (enter) keypad. There are five digits in
the
No
Heat Vend Price. The fifth digit will
appear
in
the display and will flash one second
on, one second off. Refer to
Figure
7.
NOTE:
If
the
vend
price
is $100.00
or
more, the
fifth digit is
"1-6".
If
the
vend
price
is $99.99
or
less,
the
fifth digit is
"0".
6.
Press the START (enter) keypad to enter the fifth
digit and display remaining four digits. The
active digit will flash one second on and one
second off.
NOTE:
To
go
back
to
the
current
programmable
option without changing
the
value, press
the
MED
TEMP
«)
keypad.
7.
Press the LOW TEMP (/\) or the
DELICATES
(v)
keypad to increase or decrease
the value
of
the active digit and the START
(enter) keypad to enter the value
of
the digit and
advance to the next digit.
8.
Press the START (enter) keypad with the last
active digit. The new value
is saved and the next
option, "rtC-", will appear
in
the display.
NOTE: To
program
"rtC-" (Real
Time
Clock),
refer
to
option 18. To
program
other
options,
refer
to
the
appropriate
section.
How to Exit Programming Feature
Press the MED TEMP
«)
keypad until the control
returns
to
Ready Mode.
CHM507R
Figure 7
5. Press the LOW TEMP (/\) or the
DELICATES
(v)
keypad to increase or decrease
the value
of
the fifth digit.
NOTE:
The
vend
price
can
be
set
from
0
to
65,535.
The
default value is 200.
40
© Published by pennission
of
the
copyright owner -
DO
NOT
COPY
or TRANSMIT 513001
To Next Page
Loading...
